Brand Name : YSONIX
Model Number : W5500 Ethernet Network Module With Hardware TCP/IP 51/STM32 Microcontroller Program
Certification : Rohs
Place of Origin : Guangdong,China
MOQ : 1
Price : Negotiable
Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram,Paypal
Supply Ability : 100000 Piece/Pieces per Day
Delivery Time : 1 working days
Packaging Details : Anti-static bag packed separately
Product name : 5v 2 Channel Low Level With Optocoupler Relay Expansion Board Machine Relay Module
Type : IC Modules
Stock Status : In Stock,Can ship at once
Quality : New Original
Package Type : Carton, anti plastic bag, wooden box
Shipping by : DHL\UPS\Fedex\EMS\HK Post ...etc
Operating temperature : -40 ~150
5v 2 Channel Low Level With Optocoupler Relay Expansion Board Machine Relay Module
Module parameters:
Size | 50.5mm (length) * 38.5mm (width) * 18.5 (height) |
Weight | 28g |
PCB color | black |
1.There are 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixing 2.The relay uses high-quality Songle relay, single pole double throw. One common end, one normally open end, one normally closed end. 3.Optocoupler isolation, good anti-interference. 4.Low level pull-in, high level release. The status indicator light is on when it is engaged, and it is off when it is released. 5.VCC is the system power supply, and JD_VCC is the relay power supply. Just plug in the jumper cap. |
Electrical parameters:
Supply voltage | 5VDC |
Current | greater than 100mA |
Load | 250V 10A AC or 30V 10A DC |
Wiring instructions:
VCC | system power supply positive |
GND | system power negative |
IN1--IN2 | Relay control port |
FAQ:
Pls contact us to check stock quantity,price ,lead time, E-mail: info@ysonix.com
1. The maximum current is 2.5A.
2. Up to 32 subdivisions are supported.
3. 4-layer PCB board, better heat dissipation performance.
4. The chip has lower internal resistance, lower heat generation and better heat dissipation.
parameter:
Size: 1.5mmX2mm (same as 4988)
Driven current: 2.5A
Subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32
Manufacturing process: SMT placement machine manufacturing, non-manual welding, higher yield, more stable performance
Suitable for:
Where the stepper motor needs to be driven.
It is a necessary module for building 3d printer, cnc, engraving machine and so on.
Supported 3D printers include Prusa Mendel, ultimaker, printbot, makerbot, etc.
You can refer to the following Ardu code to directly drive the motor
DRV8825 features the following points:
1. Suitable for driving stepper motor below 8.2V ~ 45V 2.5A;
2. Only simple step and direction control interface;
3. Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32;
4. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate;
5. Automatic current attenuation mode detection / selection;
6. Overheat shutdown circuit, undervoltage lockout, cross current protection;
7. Ground short circuit protection and load short circuit protection
Optocoupler Electronic Power Module 2 Channel Dc 5v Relay Module Images |